Xtreme Heaters Large 800W XXXHEAT Industrial Heater
Xtreme Heaters Large 800W XXXHEAT Industrial Heater
SKU:XXXHEAT-800-IND
Price:
Sale
Sold out
About this Heater
Xtreme Heaters XXX Large Industrial 800W XXXHEAT-IND
- True Forced Air Heating circulates air more effectively and heats more evenly for more accurate climate control.
- Automatic Thermostat turns the heater on at 50°F and off at 65°F +/-3° – the tightest tolerance available.
- Failsafe Design cannot overheat. Heating technology is dynamic and self-regulating.
- High-Efficiency Xtreme produces heat faster, circulates more air and shuts off earlier.
- Pre-wired 6ft marine rated power cord with 110V 3 prong plug eases installation.
- Maximum Life – Designed for durability and reliability.
- Complete Protection: Fully anodized inside and out.
- Small Footprint
- Meets ASSE-1060 Requirements
Our mission in creating the Xtreme Heater was to build the safest, most reliable and efficient product available. Our industrial heaters are the safe and easy answer to keeping your enclosure safe from freezing this winter.
- Well and Pump Houses: Maintain optimal temperature for uninterrupted water flow and system performance.
- Backflow Prevention Valve Enclosures: Prevent damage and ensure the reliability of your backflow prevention systems.
- Air Compressor Enclosures: Protect your air compressors from cold-related issues, enhancing operational efficiency.
- Pressure Washing Trucks/Trailers: Ensure your pressure washing equipment is always ready to go, regardless of the weather.
- Pest Control Vehicles: Keep your chemicals and equipment at the right temperature, even on the coldest days.
- Under Skirted RVs: Provide consistent warmth to protect plumbing and living spaces from the harsh cold.
- Engineered for industrial use, this heater delivers peace of mind by maintaining the ideal temperature in critical areas, reducing the risk of cold-related downtime and damage. Easy to install and energy-efficient, it's the perfect addition to any operation where temperature matters.
Specifications
- Wattage: 800W
- BTU:
- Inrush (startup) current 12A, 1 sec.
- Typical operating current is 8.5A
- Fan flow 58CFM
- IP68 (Waterproof) rated Fan
- MTBF for fan: 40,000
- Heater Dimensions: 8″ x 3.5″ x 5 1/8″
- Box packaged Dimensions 12″ x 6″ x 6″
- Fuse size required 20A
- 6ft marine rated power cord
- UPC-
| Weight | 5.0lbs |
|---|---|
| Dimensions | 8″ x 3.5″ x 5 1/8″ |
Customer Reviews
Bought the 800 watt heater for a water well house heater, it has been awesome and saved my but once all ready when I thought it quit in freeze cold temps, but it was the breaker that I had it on that went bad instead, replaced the breaker in the panel and got the heater back on and it kept everything from freezing and busting during that whole ordeal and then ran non stop for probably 24 hours and never skipped a beat. Kept the non-insolated well house well above freezing just not warm enough to shut down for that 24 hours as everything had to thaw and warm back up, but never had a problem after all of that, 18° outside right now and 49° in the well house with a very cold wind chill of 7°. Customer service was the best I have seen in a long time, answered every question I had before I bought it and recommended what he thought I should get and gave explanations of why.
cust support was fantastic ! i had owned a previous unit they gave me a trade-in discount.
their units are rock solid.
The heaters seem well built but the C S department is very forgetful
We received a new heater a few weeks ago and are using to keep our RV that is in storage safe. So far it’s working great! It’s wonderful how it turns on when needed and off when the temp gets to proper temp. So far so good!
2 x 800w extreme heaters, 1 heater in my engine bilge and 1 heater in my cabin which is open to wheelhouse on my 42’ northern bay. I’m seeing 40 degrees up to 55 degrees in both areas with 8 degrees weather conditions outside. She’s in the water for the winter.
